Ribbons
MOBILE SINK WITH WATER HEATER UM1BP gray
Independent single-chamber sink with hot water up to 50°C. Certificate from the National Institute of Hygiene
Independent single-chamber sink for mobile food outlets, gastronomic trailers, houses at fairs, tents at festives.
Does not need connection to the sewage system and water supply.
Casing - steel. 230V
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Product code: UM1BPs
Ask about the product
Administratorem danych osobowych jest PORTVEST Bartosz Różycki. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Share the product card
Product description
UM1BP model
UM1BP mobile sink – warm or cold water without permanent plumbing
The UM1BP is a self-contained, single-bowl mobile sink with an instantaneous water heater. It requires no mains water or drainage connection, and warm water is available approximately 2–3 seconds after the flow starts.
Ideal for catering outlets, food trailers, market stalls, pharmacies, vaccination points, studios, workshops, beauty salons and massage rooms.
Key features of the UM1BP mobile sink
A practical washing station designed for locations without permanent water and drainage connections.
The 3,500 W instantaneous heater operates while water is drawn and raises its temperature by approximately 30°C, up to 50°C.
The tap lever lets you select warm or cold water and adjust the temperature to suit your needs.
Separate 15 L containers hold clean and waste water without a permanent inlet or outlet.
View the UM1BP mobile sink in 360°
Drag the presentation to inspect the unit from every angle.
Instantaneous heater or tank heater?
The heating method affects available water temperatures, preparation time and the required power supply.
- Warm or cold water
- Heats only while water is being drawn
- Warm water after approximately 2–3 seconds
- Requires a 230 V supply
- Only heated water is available
- Heats water stored in the container
- Operates continuously using a thermostat
- Can operate from a 12 V battery through a suitably rated inverter
How do I prepare the UM1BP for use?
The sink uses its own containers and requires an earthed 230 V socket. The heater starts while water is being drawn.
Fill the clean-water container, place it inside the unit and submerge the pump.
Connect the sink to 230 V and set the tap lever to the required temperature.
Draw water after 2–3 seconds; regularly refill clean water and empty the waste container.
Optional foot switch and wheels
As standard, the pump is activated by the switch in the tap. Optional accessories can make operation and movement even more convenient.
Foot switchStarts the pump without using your hands.View product →
Set of wheelsMakes the sink easier to move and position.View product →The foot switch and wheels are not included as standard and are sold separately.
Important: protect the unit from frost
The UM1BP sink must not be used or stored at temperatures below 0°C.
Included in the set
- Single-bowl UM1BP mobile sink
- 15 L clean-water container
- 15 L waste-water container
- 3,500 W instantaneous water heater
- Submersible pump for the clean-water container
First use
Before connecting the power, fill the clean-water container, insert the pump and make sure it is properly submerged.
Download user manualSee how the UM1BP mobile sink works
Watch the presentation of this self-contained sink with an instantaneous heater.
Information on hygiene requirements
For activities subject to hygiene regulations, we recommend consulting the competent local authority before purchase. Requirements may vary depending on the type of activity, location and responsible inspectorate.
Technical data
- Color light gray RAL 7035
- Cabinet Material steel powder coated
- Clean water tank capacity 15L
- Dirty water tank capacity 15L
- Power supply 230V
- Power 3500W
- Sink chamber dimensions 300x240x150 mm
- Dimensions width/height/depth 330x880x450 mm
- Weight (without water) 18 kg
- Max. water temperature 30°C above pure water temperature
- Producer PORTVEST POLAND
- Warantee 2 years
- Declaration CE declaration + PZH approval for tanks
Related products
-
Price €10.00without VATShipping costs are not included in the price.
-
Price €15.00without VATShipping costs are not included in the price.
-
Price €17.00without VATShipping costs are not included in the price.
-
Price €6.00without VATShipping costs are not included in the price.
