Ribbons
- Bestseller
MOBILE DOUBLE-CHAMBER DOUBLE TAP SINK WITH WATER HEATER UM22BP gray
An independent two-chamber two taps sink for mobile catering outlets,
catering trailers, houses at fairs, tents at fairs.
It does not need connection to the sewage system and water supply.
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Product code: UM22BPs
Ask about the product
Administratorem danych osobowych jest PORTVEST Bartosz Różycki. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Share the product card
Product description
UM22BP model
UM22BP double-bowl mobile sink – two taps and warm water without permanent plumbing
The UM22BP is a self-contained mobile sink equipped with two bowls, two taps and an instantaneous water heater. It requires no mains water or drainage connection, while warm water is available approximately 2–3 seconds after the flow starts.
Two separate bowls make it easier to organise washing and rinsing. The unit is suitable for mobile catering, food trailers, market stalls, pharmacies, workshops, studios, beauty salons and massage rooms.
Key features of the UM22BP mobile sink
A complete two-station washing unit for locations without permanent water and drainage connections.
Separate work areas make it easier to divide consecutive tasks, such as washing and rinsing.
The 3,500 W instantaneous heater raises the water temperature by approximately 30°C, up to 50°C.
Separate containers hold clean and waste water without a permanent inlet or outlet.
View the UM22BP mobile sink in 360°
Drag the presentation to inspect the unit from every angle.
Instantaneous heater or tank heating element?
The heating method affects the available water temperatures, preparation time and required power supply.
- Warm or cold water can be selected
- Water is heated only while it is being drawn
- Warm water is available after approximately 2–3 seconds
- Requires a 230 V supply
- Only preheated water is available
- The water stored in the container is heated
- The heating element operates continuously via a thermostat
- May operate from a 12 V battery through a suitable inverter
How do you prepare the UM22BP for use?
The unit uses its own containers and must be connected to an earthed 230 V socket.
Fill
Fill the clean-water container, place it inside the cabinet and submerge the pump.
Connect and select a tap
Connect the unit to 230 V, open the selected tap and set its lever to the required temperature.
Use
After approximately 2–3 seconds, draw water. Refill the clean-water container and empty the waste-water container regularly.
Foot switch and wheels available separately
As standard, the pump is activated by a switch in the tap. The optional foot switch enables hands-free operation, while the wheel set makes the sink easier to move.
Foot switchStarts the pump without using your hands.View product →
Wheel setMakes moving and positioning the sink easier.View product →
The foot switch and wheels are not included as standard and are sold separately.
Important: protect the unit from frost
The UM22BP sink must not be used or stored at temperatures below 0°C.
Included in the set
- Double-bowl UM22BP mobile sink
- Two taps with temperature control
- 20 L clean-water container
- 20 L waste-water container
- 3,500 W instantaneous water heater
- Submersible pump
First use
Before connecting the power, fill the clean-water container, insert the pump and make sure it is properly submerged.
Download user manualSee how the UM22BP mobile sink works
Watch the English presentation of the double-bowl washing station.
Information on local hygiene requirements
If the unit is to be used in an activity subject to sanitary regulations, we recommend confirming the applicable requirements with the competent local authority before purchase. Requirements may vary depending on the activity and location.
Technical data
- Color light gray RAL 7035
- Cabinet Material steel powder coated
- Clean water tank capacity 20L
- Dirty water tank capacity 20L
- Power supply 230V
- Power 3500W
- Sink chamber dimensions 300x240x150 mm
- Dimensions width/height/depth 600x880x400 mm
- Weight (without water) 22 kg
- Max. water temperature 30°C above pure water temperature
- Producer PORTVEST POLAND
- Warantee 2 years
- Declaration CE declaration
Related products
-
Price €12.00without VATShipping costs are not included in the price.
-
Price €15.00without VATShipping costs are not included in the price.
-
Price €17.00without VATShipping costs are not included in the price.
